 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TD62107P/BP/F TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TD62107P,TD62107BP,TD62107F 4CH HIGH-CURRENT DARLINGTON SINK DRIVER The TD62107P / BP / F are high-voltage, high-current darlington drivers and enable inputs which can gate the outputs. All units feature integral clamp diodes for switching inductive loads. The TD62107P / BP / F have a wide supply voltage range and all input are compatible with TTL and 5-V CMOS. Application include relay, hammer, lamp and stepping moter drivers. Please observe the thermal condition for using. FEATURES l Output current (single output) 750mA (MAX) l High sustaining voltage output 80 V MIN. (TD62107BP) 45 V MIN. (TD62107P) 35 V MIN. (TD62107F) l Output clamp diodes l Enable inputs E1, E2 l Wide supply voltage range VCC = 4.75~17 V l Input compatible with TTL and 5-V CMOS l GND terminal = heat sink l Package type-P, BP l Package type-F : DIP-16pin : HSOP-16pin Weight DIP16-P-300-2.54A : 1.11 g (Typ.) HSOP16-P-300-1.00 : 0.50 g (Typ.) PIN CONNECTION (TOP VIEW) TD62107P / TD62107BP TD62107F 1 2001-07-16 TD62107P/BP/F SCHEMATICS (EACH DRIVER) TRUTH TABLE E1 L L H H E2 I1 ~ I4 L or H L or H L or H L or H O1~O4 Disable OFF Disable OFF Enable In Disable OFF L H L H In = I1 ~ I4 INPUT EQUIVALENT CIRCUIT OUTPUT EQUIVALENT CIRCUIT Note: The input and output parasitic diodes cannot be used as clamp diodes. MAXIMUM RATINGS (Ta = 25C) CHARACTERISTIC Supply Voltage P Output Sustaining Voltage BP F Output Current Input Voltage P Clamp Diode Reverse Voltage BP F Clamp Diode Forword Current P, F BP P, BP F IF VR IOUT VIN VCE (SUS) SYMBOL VCC RATING -0.5~17 -0.5~45 -0.5~80 -0.5~35 750 -0.5~VCC + 0.5 45 80 35 500 750 2.7 (Note 1) 1.4 (Note 2) -40~85 -55~150 mA V mA V V UNIT V Power Dissipation Operating Temperature Storage Temperature PD Topr Tstg W C C Note 1: On Glass Epoxy PCB (50 x 50 x 1.6 mm Cu 50%) Note 2: On Glass Epoxy PCB (60 x 30 x 1.6 mm Cu 30%) 2 2001-07-16 TD62107P/BP/F RECOMMENDED OPERATING CONDITIONS (Ta = -40~85C) CHARACTERISTIC Supply Voltage P Output Sustaining Voltage BP F P, F Output Current BP P, BP F Input Voltage P Clamp Diode ReverseVoltage BP F Clamp Diode Forward Current Power Dissipation P, F BP B, BP F IF VR VIN IOUT Tpw = 25ms, Duty = 75%, 1 Circuit Tpw = 25ms, Duty = 10%, 4 Circuits Tpw = 25ms, 4 Circuits Duty = 30% Duty = 40% VCE (SUS) SYMBOL VCC CONDITION MIN 4.75 0 0 0 0 0 0 0 Ta = 85C (Note) TYP. MAX 15 45 80 35 500 750 400 300 VCC 45 80 35 500 750 1.0 0.7 mA V V mA V UNIT V PD W Note: On Glass Epoxy PCB (60 x 30 x 1.6 mm Cu 30%) 3 2001-07-16 TD62107P/BP/F ELECTRICAL CHARACTERISTICS (Ta = 25C) CHARACTERISTIC Input Voltage "H" Level "L" Level P Output Current "H" Level BP F Output Voltage Input Current "L" Level "H" Level "L" Level P Clamp Diode Reverse Current BP F Clamp Diode Forward Voltage Output "H" ICC Output "L" P Turn-On Delay BP F P Turn-Off Delay BP F tOFF 8 tON 8 ICCL 5 P, F BP VF ICCH 7 4 IR 6 P, F BP VOL IIH IIL 3 4 5 IOH 2 SYMBOL VIH VIL TEST CIR- CUIT 1 VCE = 45 V, Ta = 75C VCE = 80 V, Ta = 85C VCE = 35 V, Ta = 85C IOUT = 50 mA IOUT = 750 mA VIN = 13 V VIN = 0.4 V VR = 45 V VR = 80 V VR = 35 V IF = 500 mA IF = 750 mA VCC = 13 V, VIN = 0 V, OUTPUT OPEN VCC = 13 V, VIN = 5 V, OUTPUT OPEN VCC = 5 V, RL = 90 CL = 15 pF, VOUT = 45 V VCC = 5 V, VOUT = 80 V RL = 160 VCC = 5 V, RL = 70 CL = 15 pF, VOUT = 35 V VCC = 5 V, RL = 90 CL = 15 pF, VOUT = 45 V VCC = 5 V, VOUT = 80 V RL = 160 VCC = 5 V, RL = 70 CL = 15 pF, VOUT = 35 V TEST CONDITION MIN 2.0 TYP. 5 0.4 5 5 1.7 5 MAX VCC 0.8 100 100 100 1.3 1.6 100 -0.3 100 100 100 2.0 2.0 13 mA 17 s s V A V A mA A UNIT V Supply Current 4 2001-07-16 TD62107P/BP/F TEST CIRCUIT 1. VIH, VIL 2. IOH 3. VOL 4. IIH, ICCL 5. IIL, ICCH 6. IR 7. VF 8. tON, tOFF Input condition Note 1: Pulse Width 50 s, Duty Cycle 10% Output Impedance 50 , tr 5ns, tf 10 ns Note 2: VIH = 3 V, E1 = VIH, E2 = GND, VCC = 5 V Note 3: CL includes probe and jig capacitance PRECAUTIONS for USING This IC does not include built-in protection circuits for excess current or overvoltage. If this IC is subjected to excess current or overvoltage, it may be destroyed. Hence, the utmost care must be taken when systems which incorporate this IC are designed. Utmost care is necessary in the design of the output line, VCC, COMMON and GND line since IC may be destroyed due to short-circuit between outputs, air contamination fault, or fault by improper grounding. 5 2001-07-16 TD62107P/BP/F 6 2001-07-16 TD62107P/BP/F PACKAGE DIMENSIONS DIP16-P-300-2.54A Unit : mm Weight: 1.11 g (Typ.) 7 2001-07-16 TD62107P/BP/F PACKAGE DIMENSIONS HSOP16-P-300-1.00 Unit : mm Weight: 0.50 g (Typ.) 8 2001-07-16 TD62107P/BP/F RESTRICTIONS ON PRODUCT USE 000707EBA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 9 2001-07-16 |
Price & Availability of TD62107P
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |